®


"The Fiddler" 6' Tall WINTERSTONE (work in progress)
Image Courtesy of Sculptor Al Green
Contact Al Green at the Sculpture Society of Canada Hompage.

"Cactus" 8' Tall WINTERSTONE (Externally Pigmented)
Image Courtesy of Sculptor Al Green
Contact Al Green at the Sculpture Society of Canada Hompage.


WINTERSTONE on Styrofoam core
Reactive chemical stain finish & waxed
Title: "Beyond Reach"
Size: 8 Feet

Image Courtesy of Sculptor Al Green
Contact Al Green at the Sculpture Society of Canada Hompage.


"Louis Riel" 16' Tall WINTERSTONE (work in progress)

Image Courtesy of Sculptor Miguel Joyal.

Casting of Sculpture approximately six feet in diameter
Artist: Marrita McMillian, Gainsville, Texas
http://www.horsesculpture.net
Mold and Casting: Keith Turman Studio, Dallas, Texas
Casting: WINTERSTONE Casting and XTRA Mix
Mold: Smooth-Sil 912 with Thivex, Plasti-Paste Mother Mold

Images Courtesy of Sculptor & Painter Angelika Kade.


Slush Cast in WINTERSTONE (Hollow), unfinished
Title: "Davis"
Size: 16 Inches
Sculptor: Davis Gailitis

WINTERSTONE on Styrofoam core
Title: "Cloak"
Size: 6-1/2 feet
Sculptor: Jo-Anne Cousins

BRONZED WINTERSTONE
Title: "Mermaid"
Size: "Lifesize"
Sculptor: Greg Bergmann
Images Curtesy of Greg Bergmann Studios
Click here for Greg Bergmann Studios homepage

WINTERSTONE
Title: "Mermaid"
Size: "Lifesize"
Sculptor: Greg Bergmann
Images Curtesy of Greg Bergmann Studios
Click here for Greg Bergmann Studios homepage

WINTERSTONE shell rendered onto a foam form
The "Eretz" Installation - Victoria, Australia
"Tree of Life" size 3m (10ft)
Sculptor: John Milder
Images Curtesy of John Milder, contact through sculptech@ozemail.com.au

WINTERSTONE shell rendered onto a foam form
The "Eretz" Installation - Victoria, Australia
"Wind/Spirit" size 3m (10ft)
Sculptor: John Milder
Images Curtesy of John Milder, contact through sculptech@ozemail.com.au

WINTERSTONE shell rendered onto a foam form
The "Eretz" Installation - Victoria, Australia
"Fire" size 3m (10ft)
Sculptor: John Milder
Images Curtesy of John Milder, contact through sculptech@ozemail.com.au



WINTERSTONE over a sculptural foam base.
Sculptor: Chris Johnson
Images Courtesy of Ice Bear Studios

 

 


Photograph of finished sculpture in cast resin.
(picture of finished resin sculpture with green patina)
WINTERSTONE was used as a model for the mold, allowing a hand crafted texture on the finished resin.


WINTERSTONE was used as a model for the mold, allowing a hand crafted texture on the finished resin.
Title: "Sacred", size approx 2 ft x 1 ft.
Sculptor: Chris Johnson
Images Courtesy of Ice Bear Studios


WINTERSTONE
Size: 9ft x 4ft x 3ft
Title: "Flow", The Power of the Wind and the Water.
Name: Kathleen Hannigan, kamaha65@yahoo.com,
Phone#760-846-6488, PO Box 485 Cardiff, CA 92007


WINTERSTONE
"Bear",
Name: James Marsico, http://www.jamesmarsico.com/
Phone: 877-667-5761

WINTERSTONE
"Cougar",
Name: James Marsico, http://www.jamesmarsico.com/
Phone: 877-667-5761

WINTERSTONE
"Moose",
Name: James Marsico, http://www.jamesmarsico.com/
Phone: 877-667-5761

Tabletop Joe From the Nocturnal series, inspired by the writings of Tom Waits.
In Waits' song, Tabletop Joe was born without a body
but still became a popular pianist.
He is made from burlap and Winterstone, and is life size
(but not much bigger than a bust).
As a result of methods developed by the sculptor,
Tabletop Joe is hollow and therefore, lightweight.

by Roger Golden
http://web.me.com/goldensculptor
rcgolden@bell.net
Sculpture:"Our Lady of Sheshan" 9ft. high in WINTERSTONE
Location: St.Martyr's Shrine park,Midland,Ontario
Commissioned by: Chinese Catholic community

Sculptor: OLEH LESIUK Tel.647-899-7963
EMAIL:oleartstudio@yahoo.com